(301) 939-0009Kitchen & bath showroom · Trade desk for builders, designers & homeowners

H&C Kitchen & Bath
Remodeling

How Much Does a Kitchen Island Cost?

A built-in kitchen island costs $2,500 to $35,000 installed. What the cabinetry, the countertop, seating support and plumbing or wiring each add, line by line.

HK H&C Kitchen & Bath Design Team · Showroom Design Center
Published Nov 15, 2026 · 7 min read

A built-in kitchen island costs $2,500 to $35,000 installed. A simple storage island with stock cabinets and an entry stone top runs $2,500 to $5,000, and a 6 to 8 foot semi-custom island with seating and outlets runs $4,500 to $11,000. Adding a sink, a cooktop or custom cabinetry moves it to $7,000 and up.

An island is three purchases that share a footprint: cabinetry, a countertop and whatever runs underneath it. The third one causes most of the budget surprises. H&C Kitchen & Bath sells the cabinets and the stone from one Derwood showroom, and our sister company H&C Construction handles the plumbing, wiring and installation, so these numbers come from seeing all three invoices on the same island.

Kitchen island cost by type

Island type Typical length Installed cost
Simple storage island, stock cabinets, no utilities 4 to 6 feet $2,500 to $5,000
Semi-custom island with seating overhang and outlets 6 to 8 feet $4,500 to $11,000
Island with a prep sink or dishwasher 7 to 9 feet $7,000 to $16,000
Custom island with main sink, cooktop or waterfall ends 9 feet and up $14,000 to $35,000+

Most islands added in a full remodel land in the second or third row. A freestanding furniture island costs $500 to $2,500, but with no stone, anchoring or utilities it is a different product, not a cheaper version of the same one.

Before pricing any of these, confirm the room can hold an island: about 42 inches of clearance on working sides, which means 12 to 13 feet of clear room width, as our kitchen layout guide explains.

Line by line: an 8-foot island with seating

This is the island we price most often: 8 feet long, semi-custom cabinets with drawers on the work side, stools on the other, a mid-range quartz top and two outlets.

Line item Typical range What it covers
Base cabinets, semi-custom, installed $2,800 to $5,200 About 8 linear feet, anchored to the floor
Finished back and end panels $400 to $1,200 The seating side and both ends are on view
Quartz top, about 28 sq ft $2,100 to $3,100 Mid-range color, template, fabrication, install
Overhang support $200 to $600 Hidden steel brackets under the seating side
Electrical, circuit and outlets $300 to $900 Wiring brought up through the floor
Total $5,800 to $11,000

The 28 square feet comes from the size of the top. A 24 inch cabinet with a 1.5 inch overhang on the work side and a 15 inch seating overhang makes a top about 40.5 inches deep, and with 1.5 inches past each end, an 8-foot island top is about 99 inches long: 99 × 40.5 ÷ 144 is about 28.

What the cabinetry really costs

Island cabinets cost more per foot than the same boxes on a wall because an island is seen from every side. The back needs a finished panel, both ends need panels or furniture-style legs, and most homeowners want drawer banks on the working side. Drawers cost more per box and earn it: a door on an island base means kneeling into a deep, dark cabinet.

Island base cabinets with open drawers and a finished end panel in a showroom

Grade moves the number as much as on the perimeter; our kitchen cabinet cost guide breaks down each tier per linear foot. A custom island, often painted a contrast color with decorative legs, typically runs $5,000 to $12,000 in cabinetry alone. Ordering the island from the same line as the perimeter keeps everything on one lead time; a contrast island from a different line can arrive weeks apart.

The countertop: size, seating and support

Island tops are priced like any countertop, per square foot installed: quartz runs $60 to $150, granite $50 to $130 and quartzite $80 to $180. What makes islands different is size. Islands over about 10 feet usually need a seam or a jumbo slab, and in a veined pattern the jumbo slab is often the cheaper way to avoid a visible seam. Our quartz countertop cost guide covers how brand tier and pattern move that price.

Seating needs an overhang of 12 to 15 inches so knees fit under the counter. In 3 cm stone anything beyond about 10 inches needs support, and in 2 cm stone anything beyond about 6: corbels, or hidden steel brackets fastened to the cabinets before templating. Our countertop overhang guide covers the sizes and when each type of support is needed. A waterfall end, where the stone turns down to the floor, is effectively another small countertop with a mitered joint: about 10 square feet of extra stone at the same per-foot price, plus the miter and the work of carrying the veining over the corner. Budget roughly $1,000 to $3,000 per end.

Plumbing and electrical: where island costs jump

An island with nothing in it is furniture with a stone top. The moment it needs water or power, the floor gets opened, and that is where estimates move the most.

Kitchen island with an undermount prep sink and a brushed gold faucet
  • Outlets only. A new circuit and two outlets run $300 to $900. Local code governs island receptacles, and the wiring has to come up through the floor, which is easier over an unfinished basement.
  • Prep sink. A second sink needs a supply, a drain and a vent. With no wall to carry a vent pipe, the plumber uses a loop vent or, where code allows, an air admittance valve. Budget $1,500 to $3,500 before the sink and faucet.
  • Main sink and dishwasher. Moving them into the island adds $2,500 to $6,000 in plumbing and electrical rough-in, more in slab-on-grade homes where concrete has to be cut.
  • Cooktop. Moving the cooktop into the island counts as moving the range, so the gas line or 240-volt circuit falls in the same $2,500 to $6,000. Ventilation comes on top: ducting a ceiling hood or a downdraft to the outside typically adds $1,500 to $4,000 before the hood itself, more where a powerful hood requires makeup air.

Decide what goes into the island before the cabinets are ordered: a sink base, a dishwasher opening and a cooktop cabinet are different boxes, and changing one later means a new lead time.

How to keep an island affordable

Keep utilities out unless you will use them daily; an island with outlets and drawers is the best value in the first table. Use the perimeter stone so one slab layout covers both, size the island to fit a single slab, and put seating on one side only, since every side of overhang adds stone, support and clearance.

The Maryland factor

Labor in the DC metro runs 15 to 25 percent above national averages, and the ranges above reflect Montgomery County pricing. Plumbing into an island over a finished basement or in a slab-on-grade house adds cost and days, and new island circuits or plumbing usually need a permit and an inspection before the floor is closed.

Frequently asked questions

How much does a kitchen island cost?

A built-in kitchen island costs $2,500 to $35,000 installed. Most 6 to 8 foot semi-custom islands with seating and outlets land between $4,500 and $11,000. Plumbing, a cooktop, custom cabinetry or waterfall ends push the price higher.

How much does a custom kitchen island cost?

A custom island typically runs $14,000 to $35,000 or more installed. Custom cabinetry alone often costs $5,000 to $12,000, and premium stone, waterfall ends and a sink or cooktop make up the rest.

How much does it cost to add a sink to a kitchen island?

A prep sink adds roughly $1,500 to $3,500 in plumbing before the sink and faucet. Moving the main sink and dishwasher into the island adds $2,500 to $6,000, more in slab-on-grade homes where concrete has to be cut.

How big should a kitchen island be?

Most islands with seating run 6 to 8 feet long and about 40 inches deep with a 15 inch seating overhang. The room matters more than the island: you need about 42 inches of clearance on working sides, which means roughly 12 to 13 feet of clear room width.

Does a kitchen island countertop need support for seating?

Usually. Seating needs a 12 to 15 inch overhang, and in 3 cm stone anything beyond about 10 inches needs corbels or hidden steel brackets. Hidden brackets typically add $200 to $600 to an island, and corbels run $50 to $300 each.

Want your island priced before you commit to it? Bring your kitchen dimensions to our Derwood showroom and we will price the same island with stock and semi-custom cabinets and two countertop options, with and without the sink. Call (301) 939-0009 or book a showroom visit.

HK
Written by

H&C Kitchen & Bath Design Team

The H&C Kitchen & Bath design team helps homeowners and trade pros across the DMV plan kitchens and baths, from cabinets and countertops to tile and flooring, at our Derwood, MD showroom.

Ready to plan yours?

See the slabs in person at our showroom

Book a free showroom visit and compare your options in person under real lighting.

Book Showroom Visit →